Pandemic-Driven Development of a Medical-Grade,Economic and Decentralized Applicable Polyolefin Filament for Additive Fused Filament Fabrication

A polyolefin with certified biocompatibility according to USP class VI was used by our group as feedstock for filament-based 3D printing to meet the highest medical standards in order to print personal protective equipment for our university hospital during the ongoing pandemic. Besides the chemical resistance and durability, as well as the ability to withstand steam sterilization, this polypropylene (PP) copolymer is characterized by its high purity, as achieved by highly efficient and selective catalytic polymerization. As the PP copolymer is suited to be printed with all common printers in fused filament fabrication (FFF), it offers an eco-friendly cost–benefit ratio, even for large-scale production. In addition, a digital workflow was established focusing on common desktop FFF printers in the medical sector. It comprises the simulation-based optimization of personalized print objects, considering the inherent material properties such as warping tendency, through to validation of the process chain by 3D scanning, sterilization, and biocompatibility analysis of the printed part. This combination of digital data processing and 3D printing with a sustainable and medically certified material showed great promise in establishing decentralized additive manufacturing in everyday hospital life to meet peaks in demand, supply bottlenecks, and enhanced personalized patient treatment.     

应用超高效液相色谱-四极杆-飞行时间质谱建立茶叶中农药残留的筛查与确证方法

基于超高效液相色谱-四极杆-飞行时间质谱(UPLC-QTOF-MS),使用UNIFI软件建立91种农药残留的筛查与确证方法,进行定性方法验证并应用于流通市场中茶叶的筛查检测。通过对收集的农药认证标准物质(CRM)分析,构建91种农药化合物的质谱数据库。样品经乙腈提取,固相萃取柱净化,Acquity BEH C18色谱柱分离,在MS^E模式下进行全信息采集(ESI+), UNIFI软件对数据进行匹配分析。设置保留时间最大偏差为±0.1 min,精确质量偏差阈值为±5×10^-6,可识别加合物形式包括[M+H]⁺、[M+Na]⁺、[M+K]⁺、[M+NH₄]⁺。参照SANTE/11813/2017指南进行定性方法学验证。在21份茶叶样品中添加混合标准溶液至4个水平(0.01、0.05、0.10、0.20 mg/kg),确定每种农药在茶叶样品中的筛查检出限(SDL),共评估了1911种农药/样品组合。发现有66种农药的SDL为0.01 mg/kg, 8种农药的SDL为0.05 mg/kg, 1种农药的SDL为0.10 mg/kg, 3种农药的SDL为0.20 mg/kg,共有13种农药的SDL大于0.20 mg/kg。一种农药在筛查检测中存在基质抑制效应。最后,应用建立的方法分析了流通市场中22份茶叶样品的农药残留情况,从6份茶叶样品中筛查检测出6种农药化合物,经人工鉴定均为阳性。该法为茶叶中农药残留的高通量筛查检测提供了参考。     

Growth of gem-grade nitrogen-doped diamond crystals heavily doped with the addition of Ba（N3）2

Additive Ba(N 3) 2 as a source of nitrogen is heavily doped into the graphite-Fe-based alloy system to grow nitrogendoped diamond crystals under a relatively high pressure (about 6.0 GPa) by employing the temperature gradient method.Gem-grade diamond crystal with a size of around 5 mm and a nitrogen concentration of about 1173 ppm is successfully synthesised for the first time under high pressure and high temperature in a China-type cubic anvil highpressure apparatus.The growth habit of diamond crystal under the environment with high degree of nitrogen doping is investigated.It is found that the morphologies of heavily nitrogen-doped diamond crystals are all of octahedral shape dominated by {111} facets.The effects of temperature and duration on nitrogen concentration and form are explored by infrared absorption spectra.The results indicate that nitrogen impurity is present in diamond predominantly in the dispersed form accompanied by aggregated form,and the aggregated nitrogen concentration in diamond increases with temperature and duration.In addition,it is indicated that nitrogen donors are more easily incorporated into growing crystals at higher temperature.Strains in nitrogen-doped diamond crystal are characterized by micro-Raman spectroscopy.Measurement results demonstrate that the undoped diamond crystals exhibit the compressive stress,whereas diamond crystals heavily doped with the addition of Ba(N 3) 2 display the tensile stress.     

铝板带冷轧过程中磨损影响因素 及磨损作用机制研究

轧后铝材表面磨损量是影响铝材轧制过程的重要因素,脱落的铝粉恶化产品表面质量、影响轧制效率。本文选用不同的添加剂配制轧制油,对铝板材进行冷轧试验,重点研究添加剂种类、铝材原始表面质量、轧制压下率三方面对铝材表面磨损性能及磨损机制的影响。结果表明：双组分添加剂轧制油中油性剂在金属表面吸附成膜,犁削磨损现象较无润滑和纯基础油轧制有明显改善,轧后铝材表面磨损量小;轧件轧前表面粗糙度大,轧辊对轧件微凸体的碾压作用加剧,被碾压下来的大量铝粉成为轧辊和轧件外的“第三体”,造成磨粒磨损加剧;化学磨损和犁削磨损同时存在于轧制过程中,油膜厚度较大时,前者是主要磨损机制;反之,后者起主导作用。     

天然矿物微粉润滑添加剂对钢摩擦副的自修复效应

通过超细研磨的方法制备了1种复合矿物微粉,采用RFT-Ⅲ型往复摩擦试验机评价了其作为润滑油添加剂对钢摩擦副的自修复效应,借助扫描电子显微镜(SEM)、能量色散谱仪(EDS)及纳米压痕仪(Nano indenter)对磨损表面及截面进行了表征,探讨了其减摩抗磨机理。结果表明：矿物微粉作为润滑油添加剂具有良好的减摩抗磨及自修复性能。其摩擦系数较基础油降低约55.1%,上下试样的磨损率相应地降低了85.7%和97.6%。添加剂与摩擦表面发生了复杂的理化作用,诱发形成了较为连续均匀的多孔氧化膜自修复层,其表面较为光滑平整,厚度约为0.72 um,主要由Fe、C和O元素构成,具有较高的微观力学性能,有效地降低了摩擦副的摩擦磨损。     

基于加性四元数误差方程的惯性/天文姿态组合算法

针对采用旋转四元数误差进行的组合导航误差建模中状态方程的非线性化问题,提出一种新的惯性/天文组合姿态组合算法,以姿态加性四元数误差和陀螺漂移为状态变量,推导系统线性化状态方程,并以天文导航和惯导姿态四元数之差为量测量,建立系统量测方程,然后利用卡尔曼滤波实现对该组合模式的信息融合,仿真分析表明,所设计的基于姿态四元数误差和陀螺漂移的组合模式能够有效估计系统状态误差,姿态误差0.02°左右,验证了其有效性,可避免较为复杂的非线性滤波器的使用,为工程实践提供了理论支持.     

Decomposing profit inefficiency in DEA through the weighted additive model

An issue that has received little attention in the Data Envelopment Analysis literature is the decomposition of profit inefficiency by means of measures that account all sources of technical inefficiency. In this paper we introduce a new way to measure and decompose profit inefficiency through weighted additive models. All our results are derived from a new Fenchel-Mahler inequality using duality theory.     

A hierarchical porous carbon membrane from polyacrylonitrile/polyvinylpyrrolidone blending membranes:Preparation,characterization and electrochemical capacitive performance

Novel hierarchical porous carbon membranes were fabricated through a simple carbonization procedure of well-defined blending polymer membrane precursors containing the source of carbon polyacrylonitrile （PAN） and an additive of polyvinylpyrrolidone （PVP）, which was prepared using phase inversion method. The as-fabricated materials were further used as the active electrode materials for supercapacitors. The effects of PVP concentration in the casting solution on structure feature and electrochemical capacitive performance of the as-prepared carbon membranes were also studied in detail. As the electrode material for supercapacitor, a high specific capacitance of 278.0 F/g could be attained at a current of 5 mA/cm2 and about 92.90% capacity retention could be maintained after 2000 charge/discharge cycles in 2 mol/L KOH solution with a PVP concentration of 0.3 wt% in the casting solution. The facile hierarchical pore structure preparation method and the good electrochemical capacitive performance make the prepared carbon membrane particularly promising for use in supercapacitor.     

超高效液相色谱-串联质谱法对比4种净化方式对不同色素含量基质中19种农药残留检测的影响

采用超高效液相色谱-串联质谱仪(UPLC-MS/MS)对含有不同色素等干扰物的4种基质(韭菜、姜、番茄和苹果)中19种农药残留进行检测,对比了4种净化方式对检测结果的影响,筛选出最佳检测方法。试样采用固相萃取法(SPE)和分散固相萃取法(QuEChERS)进行前处理净化。固相萃取柱包括3种,TPS柱、PC/NH2柱(石墨化碳黑氨基柱)和NH2柱(氨基柱),分散固相萃取的吸附剂为PSA(N-丙基乙二胺)和C18混合剂,外标法定量。研究表明,19种农药在5~100μg/kg质量浓度范围内线性关系良好,相关系数均大于0.99;TPS柱对色素的吸附效果最好,PSA+C18的吸附效果最差;经TPS柱、NH2柱和PSA+C18净化过的4种基质中,19种农药的平均加标回收率分别为72%~107%,71%~110%和72%~108%;经PC/NH2柱净化过的韭菜和姜中,多菌灵的回收率很低,番茄和苹果中无回收,其他18种农药的加标回收率为71%~110%;经TPS柱、PC/NH2柱、NH2柱和PSA+C18净化后,辛硫磷的相对标准偏差(RSD)普遍较高,其他18种农药的RSD值均小于20%,19种农药的检出限分别为0.001~3,0.007~3,0.02~4,0.02~2μg/kg,定量下限分别为0.003~10,0.02~10,0.06~15,0.05~8μg/kg。本研究为准确、高效、经济的检测目标物提供了可靠依据。     

粮油作物及茶叶中农药多残留检测的前处理技术进展

综述了粮油作物和茶叶中农药多残留检测的前处理技术,包括超临界流体萃取、加速溶剂萃取、搅拌棒吸附萃取、分散固相萃取、固相微萃取和在线凝胶渗透色谱等样品前处理方式,并详细介绍了各种方法的原理、优点及适用范围,可为粮油作物和茶叶中农药多残留检测技术的发展提供参考。